Xlt XD-9004B Manuel d'utilisateur télécharger pdf (Page 15)

Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751

Item # Description

1 1-½ Shut-Off Valve

2 1-½ x 10 Nipple

3 1-½ Tee

4 1-½ Pipe Cap

5 1-½ x 5 Nipple

6 1-½ x ¾ x 1-½ Reducing Tee

7 ¾ Shut-Off Valve

8 1-½ x ¾ Reducing Elbow

9 ¾ x 3 Nipple

OVEN GAS REQUIREMENTS

1. The appliance & its individual shutoff valve must be disconnected from the gas supply piping

system during any pressure testing of that system at test pressures in excess of 3.5 kPa or ½-

psi.

2. The appliance must be isolated from the gas supply piping system by closing its individual

manual shutoff valve during any pressure testing of the gas supply piping system at test pres-

sures equal to or less than 3.45 kPa or ½-psi.

Gas Supply Testing Requirements

 For Australia, if installing with a flexible hose assembly, the assembly must be certified to

AS/NZS 1869, & be Class B or D.

 For Standard Ovens, if installing with a flexible gas hose, the installation must comply with

either ANSI Z21.69 or CAN/CGA-6.16 & a disconnect device complying with either ANSI

Z21.41 or CAN-6.9.

 The installation must conform with local building codes, or in the absence of local codes, with

the National Fuel Gas Code, ANSI Z223.1, latest version, Natural Gas Installation Code, CAN/

CGA-B149.1, or the Propane Installation Code, CAN/CGA-B149.2, as applicable.

Gas Hose Requirements

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 105 106

Pas de commentaire

Xlt XD-9004B Manuel d'utilisateur Page 15